Mold remediation removes the visible growth, removes the porous materials that cannot be cleaned, and corrects the moisture source so the mold does not return. The process follows the IICRC S520 standard: contain the work area under negative pressure, remove or HEPA-clean affected materials, then verify the result with post-remediation testing. Earth Saving Solutions handles inspection, containment, removal, moisture-source correction, and reconstruction under one contract — Colorado's dry climate does not prevent mold once an interior cavity, basement, or HVAC component stays wet.
Earth Saving Solutions provides comprehensive mold remediation services for residential and commercial properties, addressing both visible mold growth and hidden contamination. Our certified technicians safely eliminate mold issues while implementing preventative measures to ensure long-term protection.
SCHEDULE MOLD INSPECTIONMold issues require prompt, professional attention to protect both your property and the health of its occupants. Earth Saving Solutions delivers comprehensive mold remediation services that address active growth, identify and eliminate moisture sources, and implement preventative measures to ensure mold problems don't return.
Mold is a common but potentially serious issue for Colorado properties. While some mold presence exists naturally in our environment, excessive growth inside buildings can damage structural materials, deteriorate indoor air quality, and potentially affect occupant health. Mold thrives in areas with excess moisture, whether from leaks, flooding, high humidity, or poor ventilation.
At Earth Saving Solutions, we approach mold remediation with a comprehensive perspective. Rather than simply treating visible growth, we investigate underlying causes, identify the full extent of contamination (including hidden growth), and implement lasting solutions that prevent recurrence. Our certified mold remediation specialists follow industry best practices and strict protocols to ensure safe, effective removal without cross-contamination.
Our services range from addressing small, isolated mold issues to managing large-scale remediation projects for extensive contamination. Using advanced detection methods, specialized removal techniques, and professional-grade equipment, we restore healthy indoor environments in residential and commercial properties throughout Colorado.
Every mold remediation project begins with thorough inspection and assessment, allowing us to develop appropriate, targeted remediation plans. We then execute those plans with meticulous attention to detail, verifying successful results through post-remediation testing when appropriate. Our goal is your complete satisfaction and confidence in the health of your indoor environment.
Earth Saving Solutions provides comprehensive mold remediation services, addressing both active growth and underlying causes to ensure lasting results for residential and commercial properties.
Comprehensive property evaluation to identify mold growth, determine the extent of contamination, and locate moisture sources causing or contributing to the problem.
Proper isolation of affected areas to prevent cross-contamination during remediation, protecting unaffected spaces and building occupants during the removal process.
Safe, effective elimination of mold growth using specialized techniques appropriate for the specific type of contamination and affected materials.
Identification and resolution of water intrusion, humidity issues, and other moisture problems that created conditions favorable for mold growth.
Reconstruction and replacement of building materials that were removed during the remediation process, restoring your property to pre-mold condition.
Application of specialized antimicrobial and mold-inhibiting treatments to remediated areas to help prevent future mold growth and contamination.
Final inspection and optional testing to confirm successful remediation, ensuring that mold levels have been reduced to normal, acceptable levels.
Specialized mold removal services for business properties, with protocols designed to minimize operational disruption while ensuring thorough remediation.
Various types of mold can affect indoor environments, each with different characteristics and potential concerns. Our remediation specialists are trained to identify common mold types and implement appropriate remediation strategies based on the specific contamination present.
While visual identification provides initial guidance, professional testing may be recommended in some cases to confirm specific mold types present in your property. Regardless of the mold type, our comprehensive remediation approach ensures effective treatment while addressing underlying moisture issues to prevent recurrence.
Earth Saving Solutions follows a systematic approach to mold remediation, ensuring thorough assessment, safe removal, and effective prevention of future issues.
Our certified specialists conduct a comprehensive property evaluation to identify visible mold, detect hidden growth, locate moisture sources, and determine the full extent of contamination.
Based on inspection findings, we develop a detailed remediation plan tailored to your specific situation, outlining containment strategies, removal methods, and moisture control measures.
We establish proper containment barriers and negative air pressure systems to isolate affected areas, preventing cross-contamination during the remediation process.
HEPA air filtration devices are installed to capture airborne mold spores released during remediation, improving air quality and preventing contamination of clean areas.
Using specialized techniques appropriate for the specific materials involved, we remove mold growth from affected surfaces through HEPA vacuuming, antimicrobial treatments, and mechanical cleaning.
Heavily contaminated or damaged materials that cannot be effectively cleaned are safely removed and disposed of according to appropriate regulations and guidelines.
We identify and address the underlying moisture issues that contributed to mold growth, implementing repairs, improvements, or modifications to prevent future problems.
Antimicrobial and mold-inhibiting treatments are applied to remediated areas to help prevent future mold growth, particularly in areas that may be vulnerable to moisture.
Our construction team replaces removed materials and completes necessary repairs to restore your property to pre-mold condition, often with improvements to prevent future issues.
A thorough final inspection confirms successful remediation, with optional post-remediation testing available to verify that mold levels have been reduced to normal, acceptable ranges.
Mold contamination extends beyond property damage to potential health implications for building occupants. Understanding these concerns emphasizes the importance of professional remediation for both residential and commercial properties.
Exposure to mold can affect individuals differently, with symptoms ranging from mild allergic reactions to more significant respiratory issues. Those with pre-existing respiratory conditions, compromised immune systems, allergies, or asthma may be particularly sensitive to mold exposure.
Earth Saving Solutions prioritizes health protection throughout the remediation process. Our containment protocols, air filtration systems, and thorough cleaning procedures are designed to minimize exposure risks while effectively eliminating contamination. By addressing both the mold itself and the conditions that allowed it to grow, we help create healthier indoor environments for all occupants.
Mold issues in commercial and institutional properties present unique challenges requiring specialized approaches. Earth Saving Solutions provides comprehensive commercial mold remediation services designed to address contamination while minimizing business disruption.
Our commercial remediation strategies prioritize operational continuity when possible, utilizing phased approaches, after-hours work, and containment systems that allow unaffected areas to remain functional during remediation.
We ensure all commercial remediation projects adhere to relevant regulations, including OSHA guidelines, EPA recommendations, and local requirements for commercial properties and workplaces.
With extensive resources and experienced project managers, we efficiently handle commercial remediation projects of any size, from small office spaces to large industrial facilities, medical centers, and multi-floor buildings.
We provide comprehensive documentation of all remediation activities, including detailed reports suitable for insurance claims, regulatory compliance records, and property management requirements.
Following remediation, we can establish ongoing preventative maintenance programs tailored to your facility's needs, helping identify and address potential issues before they develop into significant problems.
Our commercial remediation approaches are customized to the specific requirements of different environments, including healthcare facilities, educational institutions, hospitality properties, offices, and industrial spaces.
Being able to recognize potential indicators of mold growth helps property owners address problems early, before they develop into major contamination issues. If you notice these warning signs, professional inspection is recommended:
The most obvious sign is visible mold, which may appear as spots or patches in various colors including black, green, brown, or white on walls, ceilings, floors, or other surfaces.
A persistent musty, earthy smell is often an indicator of hidden mold growth, even when no visible mold is present. The odor is particularly noticeable in enclosed or poorly ventilated spaces.
Recent water damage, leaks, flooding, or persistent condensation create favorable conditions for mold growth. Even if mold isn't yet visible, these moisture issues often lead to contamination.
Unexplained allergic reactions, respiratory issues, or other symptoms that improve when away from the property may indicate mold problems affecting indoor air quality.
Water stains, discoloration, or deterioration of walls, ceilings, or other surfaces can indicate moisture issues that may be accompanied by or lead to mold growth.
Consistently high indoor humidity levels, condensation on windows or pipes, or a damp feeling in the air creates conditions favorable for mold development throughout a property.
Preventing mold problems is significantly easier and less costly than addressing established contamination. Earth Saving Solutions recommends these preventative measures to maintain healthy indoor environments and protect your property:
After completing mold remediation, we provide property-specific recommendations to help prevent future issues, often including improved drainage, enhanced ventilation, dehumidification solutions, and maintenance practices tailored to your building's characteristics and local climate conditions.
Explore examples of our successful mold remediation projects, demonstrating our expertise in restoring healthy indoor environments in various property types.
This residential project involved extensive mold remediation in a finished basement following a prolonged, undetected water leak behind walls. The homeowners noticed musty odors and discoloration on baseboards, prompting professional inspection that revealed significant hidden mold growth affecting drywall, framing, and insulation.
Our team established proper containment systems to protect the rest of the home during remediation, removed affected materials, and professionally cleaned salvageable structural components. We identified and repaired the source of water intrusion, installed improved drainage systems, and implemented dehumidification solutions to prevent future issues. The basement was then reconstructed with mold-resistant materials and enhanced ventilation. Post-remediation testing confirmed successful remediation, and the homeowners reported immediate improvement in indoor air quality and resolution of previous respiratory symptoms they had been experiencing.
When employees in this three-story office building began reporting health concerns and air quality issues, property management contacted Earth Saving Solutions for professional assessment. Our inspection revealed significant mold contamination within the HVAC system and behind walls on multiple floors, stemming from ongoing roof and plumbing leaks.
Working closely with property management, we developed a phased remediation approach that allowed the business to maintain operations throughout the process. Our team conducted remediation during evenings and weekends, implementing thorough containment systems in active work areas. The project included HVAC system cleaning and upgrades, extensive removal of contaminated building materials, repair of multiple water intrusion points, and reconstruction with improved materials and ventilation systems. The comprehensive remediation resolved indoor air quality issues while implementing preventative measures to protect against future problems, allowing employees to return to a healthy work environment.
Our remediation technicians hold industry-leading certifications in mold assessment and remediation, ensuring adherence to established best practices and current industry standards.
We address not just visible mold, but also hidden contamination and underlying moisture issues, providing complete solutions that prevent recurrence of mold problems.
Our team utilizes specialized remediation equipment including HEPA air filtration devices, moisture detection tools, containment systems, and professional-grade cleaning products.
All remediation procedures prioritize health protection through proper containment, air filtration, and decontamination practices that minimize exposure risks during remediation.
From initial assessment through final reconstruction, we handle all aspects of mold remediation, eliminating the need for multiple contractors and ensuring seamless project management.
We provide personalized recommendations and solutions to prevent future mold issues, helping protect your property and its occupants long after remediation is complete.
Answers to common questions about mold remediation:
Signs of mold problems include visible mold growth, musty odors, water damage or moisture issues, unexplained allergic symptoms that improve when away from the property, and discoloration or deterioration of building materials. Professional inspection is recommended if you suspect mold contamination, as many mold problems occur in hidden areas.
Small, isolated areas of mold on non-porous surfaces can sometimes be addressed by homeowners using appropriate protective equipment. However, mold covering more than 10 square feet, contamination involving HVAC systems, mold resulting from contaminated water, or mold affecting people with health concerns should be professionally remediated. DIY attempts on significant mold problems often result in incomplete remediation and cross-contamination.
Timeline depends on the extent of contamination, affected materials, and specific remediation requirements. Small-scale projects might be completed in 1-3 days, while extensive remediation involving multiple rooms or hidden contamination could require 1-2 weeks. The drying phase for water-damaged materials is particularly important and shouldn't be rushed. We provide project timeline estimates during the assessment phase.
While visible mold clearly indicates a problem requiring remediation, testing may be beneficial in certain situations: when mold is suspected but not visible, to identify the extent of contamination in hidden areas, for post-remediation verification, or when specific health concerns exist. Our specialists can determine whether testing would provide valuable information for your particular situation and recommend appropriate testing methods if needed.
Insurance coverage for mold varies significantly between policies. Generally, mold resulting from a sudden, covered water damage event (like a burst pipe) may be covered, while mold developing from long-term moisture issues or poor maintenance typically isn't covered. We work with insurance companies regularly and can help you understand your coverage and navigate the claims process when applicable.
If the underlying moisture source isn't properly addressed or if remediation isn't thorough, mold can return. That's why our approach emphasizes both complete mold removal and addressing moisture issues. We also provide preventative recommendations to help maintain a mold-resistant environment. With proper remediation and moisture control, mold problems typically don't recur in the same area.
Earth Saving Solutions provides professional mold remediation services for homes and businesses throughout Colorado. Our comprehensive approach addresses both active mold growth and underlying moisture issues for lasting results.
CALL FOR INSPECTION: 720-309-5679If you suspect mold issues in your property or need professional remediation services, our team is ready to help. Contact us for more information, to schedule an inspection, or to discuss your specific mold concerns.
Most projects finish in 3–21 days. A small contained job under 10 square feet is usually 3 to 5 days from inspection through clearance. A bathroom, basement, or single room with critical-barrier containment runs 5 to 10 days. Whole-home or HVAC-involved Condition III remediation with reconstruction can run 14 to 21 days or more. We share a written timeline at containment build-out and update it at each milestone.
| Aspect | DIY (bleach + scrub) | Professional remediation |
|---|---|---|
| Standard followed | None — relies on homeowner judgment | ANSI/IICRC S520 (Mold Remediation) and EPA guidance |
| Containment | None — spores spread to the rest of the house when the source is disturbed | Negative-air machine, critical-barrier plastic, HEPA filtration of the work area |
| Material handling | Bleach does not kill mold roots inside porous drywall, insulation, or wood framing | Affected porous materials are removed and bagged; salvageable materials are HEPA-vacuumed and cleaned |
| Moisture source | Often left un-diagnosed, so mold returns within months | Moisture source is identified, repaired, and documented before remediation closes |
| Verification | Visual only — invisible regrowth in cavities is not detected | Post-remediation verification: visual plus air sampling and surface tape-lift, often by an independent third party |
| Insurance + resale | No documentation; future buyer disclosure questions become hard to answer | Written scope, photo log, clearance letter — supports the insurance claim and future resale disclosure |
It depends on the type, the contamination size, and who lives in the home. The EPA does not assign safe-exposure limits for mold spores in indoor air, so the practical guidance is to remove visible growth and fix the moisture source rather than test for a specific species. Sensitive groups — infants, elderly, immunocompromised people, and those with asthma or allergies — are more likely to react. Colorado's dry climate does not eliminate the problem; once a wall cavity, basement, or HVAC component stays wet, mold colonizes within 24 to 72 hours regardless of outdoor humidity.
EPA guidance is to remove and replace moldy drywall and other porous materials rather than bleach them. Bleach is mostly water; the chlorine kills surface spores but the water carries the active mold deeper into the porous backing, and the roots regrow within weeks. Bleach is reasonable for non-porous surfaces — sealed tile, glass, finished metal — where the contamination sits on the surface. For drywall, insulation, ceiling tile, framing, and carpet pad, the standard of care is removal, not chemical treatment.
Post-remediation verification is the closeout test that confirms the work area has been cleaned to the standard. It typically includes a visual inspection by an independent third-party hygienist, surface tape-lift sampling, and air-quality sampling compared against an outdoor control. Insurers, real-estate transactions, and any contamination over about 100 square feet usually require it; for a small contained job in your own home it is optional but recommended. We do not perform our own clearance testing on jobs we remediate — the conflict of interest invalidates the result.
Most homeowner policies cover mold only when it is the direct result of a sudden, accidental, covered water loss — a burst pipe, an appliance overflow, an ice dam — and even then there is usually a mold sublimit separate from the dwelling coverage. Long-term seepage, foundation moisture, deferred maintenance, and flood-source mold are typically excluded. Document the moisture event before remediation starts, ask your adjuster for the mold sublimit and any required remediation protocol in writing, and keep every receipt — including the third-party clearance test.
Containment depends on the contamination size under IICRC S520. Condition I (under 10 square feet) uses light containment: poly sheeting at the door and a HEPA air scrubber. Condition II (10 to 100 square feet) uses critical-barrier containment: floor-to-ceiling poly walls, a zippered entry, a negative-air machine venting outside the home, and PPE for everyone in the work area. Condition III (over 100 square feet, or any HVAC involvement, or any heavy active growth) adds an airlock decontamination chamber and full-face respirators. We build the containment before any disturbance and tear it down only after verification passes.
For most Condition I and II jobs in a defined work area, the rest of the home stays habitable as long as the containment holds and the negative-air machine is venting outside. Sensitive occupants — children, elderly, asthma, allergies, immunocompromised people — often choose to relocate during the active removal phase. Condition III jobs, whole-home contamination, and any work involving the HVAC system usually require relocation. Ask your insurer about the loss-of-use coverage in your policy if temporary lodging is needed.
HVAC mold is treated as Condition III because the duct system can distribute spores throughout the home every time the blower runs. Standard scope includes shutting the system down, sealing supply and return registers, cleaning and disinfecting the coil and blower, and either cleaning or replacing the affected ductwork to NADCA standards. The air handler cabinet, the filter, and any porous components — insulation lining the plenum, flex duct — are usually replaced rather than cleaned. We coordinate with a licensed HVAC contractor on every system-involved job.
Colorado does not license mold contractors as a separate trade, so verification falls on you. Look for IICRC certification in Applied Microbial Remediation (AMRT) and Water Damage Restoration (WRT); a written scope citing IICRC S520; a willingness to use an independent third-party hygienist for clearance testing; and general contractor licensing for the reconstruction phase. Avoid any contractor who offers to skip containment to save money, who does their own clearance testing, or who quotes the job over the phone without an in-home inspection of the moisture source.
More questions? See our complete FAQ.
Professional mold remediation services in Denver and the surrounding areas. Available for both residential and commercial properties.
Monday–Friday: 8:00 AM – 5:00 PM
Saturday–Sunday: Closed
24/7 Emergency Restoration Service Available
